TSP

Vacuum Pump Controllers

Technical data  
 Weight  16.8 (37) kg (lbs)
 Dimensions  242 x 133 x 437
 mm, l x w x d
 Input power  120 or 220/48-62 volts/Hz
 Output  15 volts
 Display type  1/4 VGA LCD w/touchscreen
 Humidity  0 to 80% RH, noncondensing
 Temperature  0 to 40 deg C
 Communications  RS232, RS422, RS485, Ethernet
 Conformity to norms  EN61000-6-1
 EN61000-4-2
 EN61000-4-3
 EN61000-4-4
 EN61010-1
 Modes  Manual
 Programmed
 Setpoint
 Output  0-55 current (A)
 OUTPUTS Single TSP Connector  Control a single TSP with one output on the back panel of the Digitel TSP (pictured) or remote TSP.
Dual TSP Connector  Control two TSP's using dual outputs on the back of the Digitel TSP (pictured) or remote TSP.
Remote Connection  Use the Digitel TSPe to interface with a remote TSP/NEG controller over long distances.
 SERIAL PORT RS232 Port  Standard RS232 Protocol
RS422 Port  Standard RS422 Protocol
RS485 Port (Half)  Standard RS485 Protocol (Half Duplex)
Ethernet  Standard ethernet communications and browser support.
RS485 Port (Full)  Standard RS485 Protocol (Full Duplex)
 TSP Control None
Remote TSP Control  Interface with a remote TSP/NEG controller over long distances.
Dual Remote TSP Control  Interface with a dual remote TSP/NEG controller over long distances.
Remote NEG Control  Interface with a remote TSP/NEG controller over long distances.
 INPUT VOLTAGE  110-volt, US  110-volt, US Connector
 220-volt, US  220-volt, US Connector
 230-volt, EC  230-volt, European Connector
 230-volt, UK  230-volt, United Kingdom Connector
 230-volt, AU  230-volt, Australian Connector
 REMOTE HVE None  Select to control high voltage or TSP using alternate controller set-points
High Voltage Enable  High voltage or TSP can be controlled by alternate controller set-points.