| Technical data | |
| Weight | 16.8 (37) kg (lbs) |
| Dimensions | 242 x 133 x 437 mm, l x w x d |
| Input power | 120 or 220/48-62 volts/Hz |
| Output | 15 volts |
| Display type | 1/4 VGA LCD w/touchscreen |
| Humidity | 0 to 80% RH, noncondensing |
| Temperature | 0 to 40 deg C |
| Communications | RS232, RS422, RS485, Ethernet |
| Conformity to norms | EN61000-6-1 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61010-1 |
| Modes | Manual Programmed Setpoint |
| Output | 0-55 current (A) |
| OUTPUTS | Single TSP Connector | Control a single TSP with one output on the back panel of the Digitel TSP (pictured) or remote TSP. |
| Dual TSP Connector | Control two TSP's using dual outputs on the back of the Digitel TSP (pictured) or remote TSP. | |
| Remote Connection | Use the Digitel TSPe to interface with a remote TSP/NEG controller over long distances. | |
| SERIAL PORT | RS232 Port | Standard RS232 Protocol |
| RS422 Port | Standard RS422 Protocol | |
| RS485 Port (Half) | Standard RS485 Protocol (Half Duplex) | |
| Ethernet | Standard ethernet communications and browser support. | |
| RS485 Port (Full) | Standard RS485 Protocol (Full Duplex) | |
| TSP Control | None | |
| Remote TSP Control | Interface with a remote TSP/NEG controller over long distances. | |
| Dual Remote TSP Control | Interface with a dual remote TSP/NEG controller over long distances. | |
| Remote NEG Control | Interface with a remote TSP/NEG controller over long distances. | |
| INPUT VOLTAGE | 110-volt, US | 110-volt, US Connector |
| 220-volt, US | 220-volt, US Connector | |
| 230-volt, EC | 230-volt, European Connector | |
| 230-volt, UK | 230-volt, United Kingdom Connector | |
| 230-volt, AU | 230-volt, Australian Connector | |
| REMOTE HVE | None | Select to control high voltage or TSP using alternate controller set-points |
| High Voltage Enable | High voltage or TSP can be controlled by alternate controller set-points. | |