Headquarters
- Activair s.r.o.
Ostravská 311/7
747 70 Opava-Komárov
Czech Republic
| Tel: | +420 595 171 552
|
| Fax: | +420 226 013 984 |
| E-mail: | |
| ID: | 28605837
|
| VAT: | CZ28605837 |
| ID data: | 3bngrkk
|
Branch Brno
- Activair s.r.o.
Bohunická 728/24a
619 00 Brno - Horní Heršpice
Czech Republic
| Tel: | +420 545 210 455
|
| Fax: | +420 226 013 984 |
| E-mail: |
Branch Praha
-
Activair s.r.o.
Novodvorská 803/82
142 00 Praha 4 – Lhotka
Czech Republic
| Tel: | +420 222 362 288
|
| Fax: | +420 226 013 984 |
| E-mail: |
Slovakia
- Activair SK s.r.o.
Cementarenska cesta 16
974 01 Banska Bystrica
Slovakia
| Tel: | +421 948 422 022
|
| Fax: | +420 226 013 984 |
| E-mail: |
Activair.cz > > > > > >
E2M40T4
A comprehensive range of accessories is available to allow use on the widest variety of vacuum applications.
Features and Benefits
-
Advanced pressurised oil circuit to give effective lubrication even under high gas loads
-
When the pump is switched off, the spring loaded distributor valve provides oil and air suck-back protection
-
Gas Ballast control to assist in handling high water vapour loads
-
Industrial roller bearings on drive shaft for ultimate reliability and long, trouble free life
-
Full height oil sight glass for easy checking of oil level and condition
-
Easy change oil filter, with oil filter condition gauge on larger models
-
Central inlet port to allow easy mounting of mechanical booster pump if required
-
Easy to maintain, with convenient service kits and international customer support.
-
A wide range of accessories to match your application needs
-
The pumps and accessories can be supplied either as individual components or as fully systemised, factory-tested combinations.
Applications
-
Vacuum metallurgy processes
-
Thin film coating technologies
-
Pharmaceutical freeze drying
-
Refrigeration and air conditioning system evacuation, drying, and backfilling
-
Transformer and cable drying and impregnation, insulating oil treatment plant
-
Lamp manufacture
-
Cryogenic vessel evacuation
-
Vacuum drying and distillation in chemical industries
-
Semiconductor device manufacture
-
Backing pump for high vacuum applications
| Technical data | |
| Displacement | |
| 50Hz | 42.5 m3h-1 / 25 ft3min-1 |
| 60Hz | 50.5 m3h-1 / 29.7 ft3min-1 |
| Speed (Pneurop) | |
| 50Hz | 37 m3h-1 / 21.8 ft3min-1 |
| 60Hz | 44 m3h-1 / 25.9 ft3min-1 |
| Number of stages | 2 |
| Ultimate vacuum (total pressure) | |
| Without gas ballast | 1 x 10-3 mbar / 7.7 x 10-4 Torr |
| With gas ballast | 5 x 10-3 mbar / 3.8 x 10-3 Torr |
| Ultimate with Fomblin® | |
| Without gas ballast | 1 x 10-2 mbar |
| Inlet connection | ISO40 |
| Outlet connection | 25 mm flange suitable for NW25 |
| Max outlet pressure | 0.5 bar gauge |
| Max inlet pressure for water vapour | 7 mbar / 5.3 Torr |
| Max water vapour pumping rate | 0.2 kg h-1 / 0.4 lb h-1 |
| Weight | 81.5 kg / 178 lb |
| Motor protection rating | IP55 |
| Motor power | |
| 50Hz | 1.1 kW / 1.5 hp |
| 60Hz | 1.5 kW / 2 hp |
| Standard oil capacity | |
| maximum | 4 litre |
| minimum | 2.2 litre |
| PFPE oil capacity | |
| maximum | 4 litre |
| minimum | 2.2 litre |
| Recommended oil | Ultragrade 70 |
| Noise level | 65 dB (A) |
- EM40/80 Rotary Vacuum Pumps (pdf, 1251KB)
