Request form
E2M175
Features and Benefits
-
Advanced pressurised oil circuit to give effective lubrication even under high gas loads
-
When the pump is switched off, the spring loaded distributor valve provides oil and air suck-back protection
-
Gas Ballast control to assist in handling high water vapour loads
-
Industrial roller bearings on drive shaft for ultimate reliability and long, trouble free life
-
Full height oil sight glass for easy checking of oil level and condition
-
Easy change oil filter, with oil filter condition gauge on larger models
-
Central inlet port to allow easy mounting of mechanical booster pump if required
-
Easy to maintain, with convenient service kits and international customer support.
-
A wide range of accessories to match your application needs
- The pumps and accessories can be supplied either as individual components or as fully systemised, factory-tested combinations.
Applications
-
Vacuum metallurgy processes
-
Thin film coating technologies
-
Pharmaceutical freeze drying
-
Refrigeration and air conditioning system evacuation, drying, and backfilling
-
Transformer and cable drying and impregnation, insulating oil treatment plant
-
Lamp manufacture
-
Cryogenic vessel evacuation
-
Vacuum drying and distillation in chemical industries
-
Semiconductor device manufacture
- Backing pump for high vacuum applications
| Technical data | |
| Displacement | |
| 50Hz | 178 m3h-1 / 105 ft3min-1 |
| 60Hz | 214 m3h-1 / 126 ft3min-1 |
| Speed (Pneurop) | |
| 50Hz | 160 m3h-1 / 94 ft3min-1 |
| 60Hz | 196 m3h-1 / 115 ft3min-1 |
| Number of stages | 2 |
| Ultimate vacuum (total pressure) | |
| Without gas ballast | 1 x 10-3 mbar / 7.7 x 10-4 Torr |
| With gas ballast | 7 x 10-3 mbar / 5.4 x 10-3 Torr |
| Ultimate with Fomblin® | |
| Without gas ballast | 1 x 10-2 mbar |
| Inlet connection | ISO63 blank flange with seal |
| Outlet connection | ISO40 flange centre tapped |
| Max outlet pressure | 0.5 bar gauge |
| Max inlet pressure for water vapor | 20 mbar / 15 Torr |
| Max water vapor pumping rate | 0.3 kg h-1 / 0.7 lb h-1 |
| Weight | 230 kg / 508 lb |
| Motor protection rating | IP55 |
| Motor power | |
| 50Hz | 5.5 kW / 7.5 hp |
| 60Hz | 6.5 kW / 8.5 hp |
| Standard oil capacity | |
| maximum | 25 litre / 26 qt |
| minimum | 16 litre / 17 qt |
| PFPE oil capacity | |
| maximum | 18 litre / 19 qt |
| minimum | 6.5 litre / 6.9 qt |
| Recommended oil | Ultragrade 70 |
| Noise level | 75 dB (A) |
| Water cooling requirement | 1.3 lmin-1 |
- E1M175S/275S and E2M175S/275S Instruction Manual (pdf, 1199KB)