Request form
E1M18 PFPE
Features and Benefits
-
The pump is configured for use with PFPE fluids.
-
The pump is designed for reliable, long-term operation.
-
Thermal overload device prevents overheating (single phase only).
-
The drive is provided through a flexible coupling by a single-phase or three-phase (four pole) motor.
-
The motors are totally enclosed and are cooled by the motor-cooling fan.
-
Pressure die cast oil box with integral oil seals prevents oil leaks.
-
Gas ballast valve for large water vapour handling capacity.
-
Externally approved to EN61010, CSA, C22.2 and UL61010.
-
Large O-ring sealed oil sight glass allows oil condition and level to be easily inspected.
Applications
- Pumping gas mixtures that contain more than 25% oxygen
- Where gas species being pumped causes the rapid breakdown of conventional hydrocarbon oils.
| Technical data | |
| Displacement (50Hz) | 20.5 m3h-1 /12.1 ft3min-1 |
| Displacement (60Hz) | 25.0 m3h-1 /14.7 ft3min-1 |
| Speed (Pneurop 6602) 50 Hz | 17.0 m3h-1 /10 ft3min-1 |
| Speed (Pneurop 6602) 60Hz | 20.4 m3h-1 /12.1 ft3min-1 |
| Ultimate vacuum (total pressure) | |
| without gas purge | 3 x 10-2 mbar /2.2 x 10-2 Torr |
| with gas purge | 6.5 x 10-1 mbar /4.8 x 10-1 Torr |
| with Fomblin® | 3 x 10-1 mbar /2.56 x 10-2 Torr |
| Inlet connection | NW25 |
| Outlet connection | Nozzle 15 mm external Ø removable from 3/4 in BSP tapped hole |
| Max permitted pressure at outlet | 0.5 bar gauge /7 psig |
| Max inlet pressure for water vapour | 50 mbar / 38 Torr |
| Max water vapour pumping rate | 0.65 kg h-1 |
| Operating temp range | 13-40°C |
| Nominal Rotation speed 50/60Hz | 1440/1720 rpm |
| Power connector 1-ph* | IEC EN60320 C19 |
| Motor power 50 Hz | 0.55 kW |
| Motor power 60 Hz | 0.75 kW |
| Weight | 37 kg / 82 lbs |
| Noise @ 50Hz | 57 dB(A) |
| Oil capacity - max | 1.4 litre |
| Oil capacity - min | 0.9 litre |
| Recommended oil (supplied) | Ultragrade 19 |
* Pumps listed with IEC connector only